Portable Dialysis Water System with Heat Disinfection

    Portable Dialysis Water System with Heat Disinfection

    Millenium HX Dialysis Water System

    Isolated Automated Heat Disinfection 

    Mar Cor Purification offers the next generation portable water for dialysis system, the Millenium HX. This compact automatic RO represents a quantum leap in reliable water production with the added feature of automatic hot water disinfection. The Millenium HX is designed to meet AAMI grade water standards according to ANSI/AAMI 13959 and is cleared for use in hospital acute dialysis settings. 

     

    automated heat disinfectionEnery efficienthigh water recovery

     

Ideal For Hospital Acute Use
Complete System Disinfection - Unit has the ability to disinfect the RO and the product water supply tubing to the dialysis machine.
Quiet Operation - Low noise level for regular and nocturnal treatments.
Automated Disinfection - Water system can be programmed to complete a heat cycle disinfection without attendant involvement
Internet Connectable - Data logging of important events along with password protected set-point & interactive troubleshooting screens.
Safety - Programmable auto-flushing and continuous product loop eliminates stagnation and ensures system cleanliness and readiness.
User Friendly - Color touch screen LCD control panel offers display of operational functions & key parameters.
Isolated Automated Disinfection - Unit can complete a heat disinfection cycle disconnected from water source, eliminating the possibility of a water leak
Standard Features 
• Modular design for easy service procedures including ergonomically built-in-handles for placement or positioning.
• Data logging of important events along with password protected set-point & interactive troubleshooting screens.
• Improves membrane life with a low PSI shutdown.
• Immediate heat or chemical mode plus
programable, reoccurring heat disinfection.
• Temperature compensation feature automatically adjusts flow.
• Improved membrane access allows removal from rear without machine disassembly.
• Environmentally & economically friendly design requires less power to operate.
• Certified to UL 61010-1, IEC 60601-1-2, & CAN/CSA C22.2 No: 61010-1

 

 

Millenium HX Specifications
ModelMHX 
Part Number3025975 - 115 V, 50/60 Hz, 6 A3025790 - 230 V, 50/60 Hz, 3 A
Nominal Product Flow Rate1970 ml/min 
at 77°F (25°C)31.2 gallons/hr (118 liters/hr) 
Machine Recovery Rate50% (maximum) 
Dry Weight70 lbs. (32 kg) 
Power Range115/230 V, 60/50Hz, 6/3 amps 
Dimensions Vertical (of Assembled Unit) 
Wide - 8.5” (21.6 cm)  
Depth - 23.5” (60 cm)
Height - 25.5” (65 cm)
Note: Initial product flow rate based on membrane manufacturer’s specifications of pretreated feed water, 100 psi (14 bars) applied pressure, 77°F (25°C) incoming water temperature, 2,000 ppm (mg/L) NaCl, 15% recovery and 1 psi product pressure. Membrane flux may vary ± 10%. For MHX-750, 200 psi (14 bars) applied pressure, 2,000 ppm (mg/L) NaCl, and 15% recovery.
Operational Parameters 
pHOperating: 5.5-10.5Cleaning: 2-11
pH with ChloraminesOperating: 5.5-8.5Cleaning: 2-11
Temperature45-90°F (1.7-32°C) 
Water production decreases approximately 1.5% per 1°F (3% per 1°C) incoming water temperature drop.
Inlet Pressure (Dynamic)Minimum: 30 psi (2 bars)Maximum: 75 psi (5.17 bars)
Inlet Water FlowMinimum: 2 gpm (7.6 L/m) 
Total Hardness10 grains (pH dependent) 
Silt Density Index (SDI)<5 
Note:  Detailed analysis of the feed water will dictate the components, if any, needed in pre- or post-treatment of the Millenium HX RO unit. This will help assure a constant supply of water, meeting AAMI Dialysis Water Quality Standards.
 ManualsP/N
 Millenium HX RO Manual3030226
  
 Tech NotesDate
 TN287- MIllenium HX® Chemical Disinfection Frequency Change Notification1/17/2017
 TN306- MIllenium HX® RO System Waste Flow Rate8/7/19
 TN309- MIllenium HX® Water Purification System Check Valve Preventative Maintenance11/19/19
  
 General Tech NotesDate
 TN102-Recovery-3002413.pdf1/16/2009
 TN103-Hemodialysis Water Quality Standards-3002433g.pdf2/7/2009
 TN104-Nominal Rejection Characteristics of Reverse Osmosis Membranes-3002434c.pdf1/16/2009
 TN107-Resistivity Measurement-3002435c.pdf1/16/2009
 TN108-Flow and Volume Equivalents-3002436c.pdf1/16/2009
 TN111-Water Quality Conversion Table-3002437c.pdf1/16/2009
 TN112-Unit Conversion Tables-3002438.pdf1/16/2009
 TN113-Temperature Correction Factors for Thin Film Membranes-3002432e.pdf5/25/2011
 TN114-Unit of Measure and Their Abbreviations-3002409c.pdf1/16/2009
 TN115-Useful Formulas-3002430.pdf1/16/2009
 TN116-AAMI Analysis-3003016.pdf1/27/2009
 TN117-Concentrations of Toxic Effects to Dialysis Patients-3002431c.pdf1/16/2009
 TN118-Chemical Names, Common Names and Formulas-3002459c.pdf1/16/2009
 TN119-Most Commonly Asked Questions-3002460d.pdf10/20/2011
 TN120-Glossary of Terms-3002461.pdf1/16/2009
 TN122-Chemical Toxic Effects in Drinking Water-3002462c.pdf1/16/2009
 TN128-Wire Connections-3002978.pdf1/27/2009
 TN158-RO Cleaning Disinfecting Considerations-3003010d.pdf1/22/2010
 TN159-Alarm Set Point for RO Machines-3003013d.pdf2/3/2012
 TN212-Increased EBCT on Portable RO Systems-3026771d.pdf7/20/2012
 TN274-Carbon Block Filter Housing Replacement9/25/2015

Copyright © 2016 Mar Cor Purification. All Rights Reserved.