Actril Cold Sterilant is an effective, ready-to-use
disinfectant and sterilant for hard surfaces commonly
found in pharmaceutical cleanrooms. Surfaces made from
non-porous materials such as plastics, stainless steel
or glass can be disinfected using Actril Cold Sterilant
solutions. Examples include counter tops, walls, floors,
etc.
Actril Cold Sterilant
Effectiveness
Actril Cold Sterilant is a powerful disinfectant containing
a proprietary mixture of 0.08% peracetic acid and 1.0%
hydrogen peroxide. It is effective against a broad spectrum
of organisms, including bacterial spores, fungal spores,
bacteria, mycobacteria, yeast, molds and viruses.
Actril Cold Sterilant is not a systemic bactericide. Rather
it is a powerful oxidizer that attacks and breaks down
the organic components of microorganisms, not just killing
them, but destroying their structure. This makes Actril
Cold Sterilant one of the fastest acting and most effective
disinfectants available.
Procedure for Broad Spectrum Disinfection
1. Using water or mechanical action, remove heavy soil
and gross filth from the surfaces to be disinfected.
2. Apply Actril Cold Sterilant directly (no dilution)
on the surfaces.
3. Allow the Actril Cold Sterilant to remain on the
surface for 10 minutes.
4. Let air dry or rinse with purified water, drain off
any excess water if possible, and then allow to dry.
Procedure for use as a Germicidal
Disinfectant Spray
1. Using water or mechanical action, remove heavy soil
and gross filth from the surfaces to be disinfected.
2. Apply Actril Cold Sterilant directly (no dilution)
using a plastic spray bottle.
3. Allow the Actril Cold Sterilant to remain on the
surface for 30 seconds.
4. Let air dry or rinse with purified water, drain off
any excess water if possible, and then allow to dry.
Storage and Disposal
Store any unused Actril Cold Sterilant in its original
container. Do not expose to direct sunlight. Always
follow local regulations for the disposal of any unused
Actril Cold Sterilant solution.
|
