BioScience Products

Actril Cold Sterilant CR Packaging

Sporicidal Disinfectant
Actril Cold Sterilant is a sporicidal disinfectant that is proven to inactivate even the most difficult microorganisms. For a full listing of microbiological testing, please contact your Actril Cold Sterilant representative.

Low Residuals
Once applied, Actril Cold Sterilant effectively works to deactivate all bio-matter. Residuals after use (in internal studies) were below detectable limits.

Clean Room Packaging
Each case of Actril includes 6 x 0.96 liters & 6 sprayers per case. Each bottle and sprayer are wiped down with alcohol and clean room wipers, double bagged in a controlled environment and EtO processed.

EtO Processed
Validation testing supports a 106 sporicidal reduction of contamination. Specifically, three validation half cycles confirmed complete kill on the recommended external and internal Biological Indicators (BI) (106 B. atrophaeus) following EtO exposure. (Testing was done in accordance to the ANSI/AAMI/ISO 11135:2007.) EtO residual levels conform to ISO 10993-7.

Key Specifications
Active Chemical Ingredients Hydrogen Peroxide: 0.8% min (1% normative)
Peracetic Acid: 0.06% min (0.08% normative)
Filtration: Filtered at 0.2 microns, Absolute

Actril Cold Sterilant Material Compatibility

Metals
Stainless Steel (316)
Aluminum Alloy (6061)   

Plastics
Polypropylene
Teflon
Acrylonitrile-butadienestyrene (ABS)
Polyethylene
Polyvinylchloride (PVC)
Polycarbonate
Tygon

Elastomers
Silicone Rubber

 


Actril® Cold Sterilant Clean Room Packaging
Actril Cold Sterilant Clean Room Packaging

Actril Cold Sterilant Clean Room Packaging

Ready-To-Use Sporicide For Surface Disinfection

Actril Cold Sterilant, already used in clean rooms for 20 years, is now even easier to use in these critical environments. Actril Cold Sterilant has been optimized for the clean room environment by packaging it to bring straight into the clean room suite. No longer does the product need to be cleaned and wiped down to bring it into these critical environments. Because of the unique method of disinfection, Actril does not have to be part of a rotation of disinfectants program.

 

Applications

  • Pharmaceutical, biotechnology, medical device manufacturing
  • Research and laboratory facilities
  • Other critical contamination environments

 

Safety and Environment
Actril Cold Sterilant is extremely eco-friendly because Actril’s raw materials are not listed as carcinogenic or mutanagenic materials, does not produce toxic vapors, and is safe for the environment. It is completely biodegradable and will decompose into oxygen, water and acetic acid.*

* Unused ACTRIL Cold Sterilants is acidic and requires normal neutralization as specified by local regulations. ACTRIL has a pH of 1.5 to 2.0
Product Literature Test reports
Actril® Clean Room Packaging Brochure Actril& Minncare Cold Sterilants: Effectiveness against MRSA & MSSA
Actril Cold Sterilant Surface Disinfectant Application Notes Residuals From Minncare & Actril
Actril Clean Room Packaging MSDS Clostridium Difficile (C.Diff) Endospores and PAA Germicides
Certificates of Analysis Surface Test “USP <1072>”, Efficacy Against Various Organisms
Contact Information  
Request More Information  
Request a Quote  
Contact Your Local Sales Person