Service deionization is a portable DI and carbon exchange service that allows customers to produce high purity water in an economical manner. A typical SDI system includes a carbon tank and ion exchange resin tanks which are designed and configured to meet your requirements for water quantity, quality and financial goals.
Mar Cor has local offices in 20 locations, 6 of which are regeneration facilities in the US and Canada to provide timely and economical SDI services. Factory trained and certified Mar Cor Service Technicians install and maintain the SDI systems with freshly regenerated ion exchange resins. Each system is supported by a support center to provide minimum 48 hour response to emergencies.
|Some of the benefits of an SDI system are
• Minimal capital investment
• No operational responsibility, Mar Cor automatically services the equipment
• Water quality & quantity is guaranteed
• Flexible account configurations to respond to your immediate needs
• Stringent quality and traceability procedures insures performance
• High purity water for temporary situations
• Quality control of the entire process is critical to meeting the needs and expectations of our customers, and we have the highest level of quality control in the industry
Service Exchange Deionization Products
Activated Carbon Units
Activated Carbon Units remove both chlorine and dissolved organic contaminants. Suitable for demanding applications such as hemodialysis.
Dialysis Carbon Units
Dialysis Carbon Units remove both chlorine and dissolved organic contaminants.
Cation Deionizers have a high capacity to remove positively charged dissolved ionic contaminants such as calcium, sodium, magnesium, potassium, iron, and manganese.
Anion Bed Deionizers
Anion Bed Deionizers have a high capacity to remove negatively charged dissolved ionic contaminants such as carbonate, bicarbonates, sulfates, chlorides, nitrates and silica.
Mixed Bed Deionizers
Mixed Bed Deionizers enhanced removal of silica and CO2 , as well as provide higher quality, and a more neutral pH than separate bed systems.
Polished Mixed-Bed Deionizers
Polished Mixed-Bed Deionizers are charged with a low TOC semi-conductor grade resin to provide superior silica removal, and significantly lower TOC levels.
Dedicated Resin Deionizers
Dedicated Resin Deionizers are used in special situations such as validated systems, where the resin from a specific client is not mixed with other resins, but regenerated in a dedicated process.
Macroporous Organic Scavenger Resins
Macroporous Organic Scavenger Resins offer extra-large internal surface areas, and can therefore provide an effective method for the removal of organic matter such as tanning and Lignins. (Available in Canada only)
Service Exchange Deionization Quality Control
At Mar Cor, there are no shortcuts on quality. Proper regeneration is critical for optimum performance, exchange capacity, total volume output and low operating cost. Our quality control specialists carefully pretest, then select only resin lots that meet our stringent requirements, assuring you the highest quality water and maximum performance from each regenerated deionizer. For critical hemodialysis applications our SDI systems are regenerated in US FDAQSR Inspected facilities in accordance as well as Health Canada.
Quality control of the entire process is critical to meeting the needs and expectations of our customers, and we have the highest level of quality control in the industry. From incoming QC of resins and tanks to verification of regeneration procedures to tank traceability, all aspects of the process are provided.
In addition to the full line of SDI Products , Mar Cor’s service team can provide related items such as replacement parts, filter cartridges, membranes, UV lights and various types of instrumentation.
Quality Tested Before it Reaches You
Each regenerated service unit is tested for pressure integrity and product water quality before it is installed in your plant.
Each service unit is chemically sanitized before refilling.
We have a comprehensive document control system. No process changes are made without proper notification and approval.
The serial number of each service unit is recorded on the production control log, so total traceability is ensured.