WRO 300 H

    Portable Dialysis Water System

    The first 510(k) Portable Reverse Osmosis System with Automated Hot Water Disinfection. The WRO 300 H has been designed to overcome the problem of microbiological build up in portable dialysis water systems that may have extended idle periods. By integrating an automated heat disinfection system into the unit, the WRO 300 H system is engineered and manufactured to be clean by design.

    automated heat disinfection Energy high recovery
Portable Dialysis Water System
  • Features
  • Specifications
  • Literature
  • Tech Documents
What Makes the WRO 300 H Different?
Ease of Use - Automated procedures to minimize caregiver involvement
Quiet Operation - Low noise level for regular and nocturnal treatments
Low Maintenance - Validated, Automated Hot Water or Chemical disinfection for bacteria control
Safety - Programmable auto-flushing and continuous product loop eliminates stagnation and ensures system cleanliness and readiness
Reliability - Consistent production of quality water on demand
Service & Support - Technical assistance, manuals, training DVDs for help when needed
Standard Features
• Portable, compact and easy to operate with a very low noise level
• Additional automated procedures and internal diagnostic minimize home patients and caregiver involvement
• Programmable automated flushing and continuous product water loop eliminate stagnation and ensures system cleanliness
• Continuous product water loop minimizes water volume requirements for purified water production
• Automated processes ensure consistency with disinfection procedures
• End-to-end disinfection with qualified dialysis machines
 
   
  WRO 300 H Specifications
  Part Number 107365
     
  Feed Water Supply
  Input 0.8 gpm (3.0 l/min) required
  Pressure 20 to 45 psi (0.15 to 0.3 mPa)*
  Temperature 41 to 86°F (5 to 30°C)
  Quality Potable water shall be used. Softener followed by carbon/particle filter ensures optimum performance.
     
  Product Water
  Output Minimum 0.3 gpm (1.1 l/min) at 50°F (10°C) and 22 psi (0.15 mPa) outlet pressure
  Quality Depends on inlet water quality. If potable water is used and WRO 300 H is maintained according to the manual, the following minimum rejection rates will be obtained:
  Total dissolved salts > 96 %
  Bacteria and pyrogens > 99 %
   
  Drain Requirements
  Operation 0.32 ± 0.03 gpm (1.2 ± 0.1 l/min)
  Peak Flow (Rinse) 0.8 gpm (3.0 l/min)
     
  Reverse Osmosis Membrane
  Material Polyamide, thin film composite
  Configuration Spiral wound
  pH-Tolerance 2–11
     
  Disinfection & Cleaning
  Heat Disinfection User initiated or automatic start of heat disinfection
  Chemical Disinfection Automatic dilution of disinfectant.  Rinse memory forcing the rinse program to start after chemical disinfection.
  Cleaning Customized programs for different customer needs
     
  Power Supply
  Main Voltage 100, 115 or 220-240 V +/-10%, 50 or 60 Hz
Power 100V: max 1500 W, 115V: max 1380 W, 220-240V: max 1850W
   
  WRO 300 H Dimensions
  Depth - Max 20.5 inches (520mm) Depth - Footprint 15.0 inches (380mm)
  Width - Max 8.1 inches (205mm) Width - Footprint 7.3 inches (185mm)
  Height 22.2 inches (563mm) Weight 72.75 lbs (33kg)
         

 


   
  Manuals P/N
  WRO 300 H Manual - Operators Guide 3027436
   
  Product Tech Notes Date
  TN225-WRO Inlet Hose Modification For Use With M1, M2 and Docking Station Carts 10/24/2011
  TN230-WRO Mounting on Docking Station 4/25/2012
  TN234-WRO 300-300 H New 4 3 CPU and Display 9/19/2012
     
  General Tech Notes Date
  TN102-Recovery-3002413.pdf 1/16/2009
  TN103-Hemodialysis Water Quality Standards-3002433g.pdf 2/7/2009
  TN104-Nominal Rejection Characteristics of Reverse Osmosis Membranes-3002434c.pdf 1/16/2009
  TN107-Resistivity Measurement-3002435c.pdf 1/16/2009
  TN108-Flow and Volume Equivalents-3002436c.pdf 1/16/2009
  TN111-Water Quality Conversion Table-3002437c.pdf 1/16/2009
  TN112-Unit Conversion Tables-3002438c.pdf 1/16/2009
  TN113-Temperature Correction Factors for Thin Film Membranes-3002432e.pdf 5/25/2011
  TN114-Unit of Measure and Their Abbreviations-3002409c.pdf 1/16/2009
  TN115-Useful Formulas-3002430c.pdf 1/16/2009
  TN116-AAMI Analysis-3003016c.pdf 1/27/2009
  TN117-Concentrations of Toxic Effects to Dialysis Patients-3002431c.pdf 1/16/2009
  TN118-Chemical Names, Common Names and Formulas-3002459c.pdf 1/16/2009
  TN119-Most Commonly Asked Questions-3002460d.pdf 10/20/2011
  TN120-Glossary of Terms-3002461c.pdf 1/16/2009
  TN122-Chemical Toxic Effects in Drinking Water-3002462c.pdf 1/16/2009
  TN128-Wire Connections-3002978c.pdf 1/27/2009
  TN158-RO Cleaning Disinfecting Considerations-3003010d.pdf 1/22/2010
  TN159-Alarm Set Point for RO Machines-3003013d.pdf 2/3/2012
  TN195-RO Operation On High Temp Feed Water-3026689a.pdf 4/20/2010
  TN212-Increased EBCT on Portable RO Systems-3026771d.pdf 7/20/2012
     

Copyright © 2006–2014 Mar Cor Purification . All rights reserved.